Installments Epoxy steel glue 4 minutes Versachem 4 Minute Steel Epoxy 56.7 g is a fast-acting industrial epoxy resin, which is great for combining metal with metal or repairing defects in metal, wood and brickwork. After complete hardening of steel-like mass, it can be subjected to shock loads, grinding, painting.
Features:
- Suitable for: aluminum, steel, brass, bronze, metal
- Tensile strength: 3000 psi (211 kg / cm 2 )
- Color: gray
- Waterproof
- Processing time: 4 minutes
- Installation time: 10 minutes
- Cure time: 24 hours
- Temperature range: 105 ° C (continuous), -184 ° C (intermittent)
- Does not ignite
- Chemical Resistance: Most Automotive Fluids
Application: Remove the cover from each tube and pierce the protective film (each tube with its own cover). After pre-cleaning and drying the surface to be treated, squeeze the same amount of resin and fixative onto a clean surface and mix until a homogeneous mass is formed. Mix only the amount that you have time to apply in 4 minutes. (At temperatures below + 7 ° C, the rate of solidification decreases). Apply the mixture to the surface and easily press for gluing.
Tips and Tricks:
Equal parts of the hardener and the resin must be thoroughly mixed in order for this product to harden properly.
Mix only the required amount of hardener and resin that you will use during the processing time.
Removable tape is good for covering areas that you do not want epoxy to work on. Remove the tape before using epoxy.
